Replacing a roof in Norton, MA. A 12-Step Guide from an expert roofing company

1. Remove the existing shingle roof

Depending on the condition of the current roof, a professional will either pry off old shingles or use a power saw to cut them open and remove them. The old shingles will then be disposed of or recycled appropriately.

At BOSS Services Inc., we understand the importance of disposing of old shingles in an environmentally friendly way. We take great care to ensure that the old shingles from our roofing projects are taken to a recycling facility for proper disposal. By doing this, we prevent them from ending up in landfills where they can take years to break down and cause environmental damage. Not only does recycling help protect our planet, but it also helps reduce waste and conserve resources – both of which are important considerations when replacing a roof in Norton, MA.

2. Check for damage

A professional will inspect the roof deck for damage and make necessary repairs such as replacing rotten or warped boards and adding additional plywood or other material where necessary.

When it comes to inspecting the roof deck for damage and making necessary repairs, a professional will conduct a thorough examination of the boards and supporting structures. They will look for signs of rot or warping that may indicate weakened structural integrity. Additionally, they will take into account any potential hazards that could be caused by water infiltration, such as mold growth or wood decay. In cases where repairs are needed such as replacing rotten or warped boards, a professional roofer will add additional plywood or other material to ensure the repair is completed correctly and securely. Boss Services professionals have experience in these types of projects and can quickly identify any potential issues to be addressed before they become larger problems. By taking the time to inspect and repair the roof deck, a professional is helping to ensure the integrity of the new roofing system.

3. Install ice & water shield

Ice and water shield is a waterproof membrane that goes under the shingles to protect against leaks caused by melting snow, ice, and rain. It’s important to make sure this is installed properly and securely.

Boss Service’s professional roofing installation experts will begin by properly measuring the area for ice and water shield installation. The membrane is typically applied to the areas of the roof that are most vulnerable to leaks caused by melting snow, ice, or rain. This typically includes eaves, valleys, ridges, and any areas where there are penetrations such as pipes or vents. Once the areas have been measured, a professional roofer will then cut the membrane to fit and install it using nails or staples. The ice and water shield should be installed in accordance with the manufacturer’s instructions to ensure proper waterproofing of the roof. Additionally, this step is also important for preventing future leaks that could potentially damage structures below the roof. By taking the time to properly install ice and water shield, a professional is helping to ensure a secure and long-lasting roofing system to withstand the Norton, MA weather.

4. Install underlayment

Underlayment is a layer of protection that goes between the roof deck and the shingles. It helps protect against wind damage, leaks, and weather-related wear and tear.

Write a paragraph with more detail on how the professional will install quality underlayment

Our installation professionals will start by making sure the underlayment is properly measured and cut to size. They will then secure it firmly to the roof deck with nails or staples. The underlayment should be installed in accordance with the manufacturer’s instructions to ensure that it protects against wind damage, leaks, and weather-related wear and tear. Additionally, they will use quality materials that are designed to stand up to the weather in Norton, MA. By taking the time to install underlayment correctly and securely, our professional installers are helping ensure the best possible roof for your home or business. This layer of protection is essential for maintaining the structural integrity of the new roofing system. With the help of our professionals, you can be sure that your roof will be built to last for years to come.

Drip edge Installation

Our professional installers understand the importance of installing drip edge correctly to protect your roof from water infiltration and excessive wear. Drip edge is a metal strip that is installed along the edges of the roof to help direct runoff away from vulnerable areas, such as fascia boards, corner posts, and window frames. It also helps ensure proper water drainage by creating a small gap between the roof and any siding. Our professionals will start by measuring the space to ensure that it is properly cut to size. They will then install it firmly into place, making sure that all edges are securely fastened. By taking the time to install drip edge correctly, our professional installers are helping to protect your home or business from potential water damage. Additionally, proper installation can help extend the life of your roof and limit costly repairs in the future. With the help of our experienced installers, you can be sure that your drip edge is installed correctly for optimal protection. Never underestimate the importance of proper drip edge installation!

5. Measure & cut shingles:

A professional will measure and cut the shingles to fit correctly on the roof. It’s important to make sure each piece is cut properly for a good seal and secure attachment.

Our installation professionals will use special tools to measure and cut the shingles with precision. They will make sure that each piece is cut accurately so that it fits securely in place. This way, there won’t be any gaps or spaces left between the shingles, which could cause water infiltration and leaks. Our experienced installers will also take extra care to make sure the edges of each shingle are properly sealed with roofing cement. This will help ensure that the entire roof is airtight and water-resistant. Additionally, proper measuring and cutting of the shingles can help extend the life of your roof and reduce costly repairs in the future. With the help of our experienced professionals, you can be sure that your roofing system is built to last. No detail will be overlooked!

6. Lay the first row:

The first row of shingles should be placed starting from one corner of the roof, working up in an overlapping pattern until you reach the peak.

Our experienced installation professionals will begin the roofing process by laying the first row of shingles, starting from one corner of the roof. This row must be placed in an overlapping pattern that extends to the peak. To ensure proper installation, our professionals will carefully measure and cut each shingle before securing it firmly into place with nails or staples. They will also use special roofing cement to seal the edges of each shingle, helping to create an airtight seal that is resistant to water infiltration. This initial row serves as the foundation for the entire roof and must be installed correctly in order for the rest of the shingles to fit properly. With the help of our experienced installers, you can be sure that your roofing system will be built with precision and expertise.

7. Secure shingles

Nails or staples are used to secure the shingles in place and should be placed about 6 inches apart along each side of each shingle. This will ensure a secure fit that can stand up to wind and weather damage.

Nails or staples are used to securely attach the shingles to the roof, and should be placed every 6 inches apart along each side of the shingle. This provides extra strength and stability to ensure that each shingle stays in place, even during strong winds and inclement weather. Our experienced installation professionals will take extra care to make sure that each nail or staple is properly placed with the correct amount of pressure, creating an airtight seal and preventing water infiltration. They will also use special tools to make sure that the nails are not over-driven into the shingle, which can cause unnecessary damage and weaken the roof’s structure. With their expertise and skill, our professional installers can ensure that your roof is built to last. No detail will be overlooked!

8. Seal around vents, chimneys, etc. with flashing

Flashing tape or sealant is used to seal around vents, chimneys, skylights, and any other openings in the roof. This will help protect against leaks.

Write about the importance of using flashing where it is needed

Flashing is an important part of any roofing project. It helps ensure that the roof is airtight and water-resistant, providing protection against leaks and other potential problems. Flashing tape or sealant should be used to seal around vents, chimneys, skylights, and any other openings in the roof. This helps prevent water infiltration and helps protect against costly repairs in the future. Our experienced professionals will take extra care to make sure that all flashing is applied properly, with no gaps or spaces left between each piece. This will create a seamless seal that can stand up to wind and weather damage. With their expertise and skill, our professional installers can ensure that your roof is built to last for years to come.

9. Inspect joints and seams

After installation is complete, a professional should inspect all joints and seams to ensure they are properly sealed and secure.

As a roofing contractor, it is essential to have detailed workmanship and check your own work before you leave the job. Quality roof installation requires an eye for detail and a commitment to excellence in order to ensure that all materials are installed correctly and securely. A quality roof should last for years with minimal maintenance required, so it’s important to make sure that every aspect of the installation process is done properly from start to finish. This includes checking joints and seams after completion of the project, as well as inspecting your own work throughout each step of the process. By taking extra care when installing a roof, you can rest assured knowing that your customers will be satisfied with their new roofs for years to come!

10. Clean up debris

It is important to remove any debris left behind from the installation process in order to maintain a safe and clean working environment.

The cleanup process is an incredibly important part of any roofing job. After the installation is complete, it’s essential to have a thorough and meticulous clean-up procedure in order to ensure that the job site is safe and free from debris. This helps prevent accidents from occurring, as well as preserve the integrity of the finished product.

Installing a new roofing system is an important decision, but done correctly it can be a great investment. Following these steps will help ensure that the job is done right and give you a durable, weather-resistant roof that will stand for years to come. With proper maintenance and care, your new roof will provide protection from the elements and add value to your home.

For expert installation of your next roof, please call us at (508) 297-0635 or email us at: bossservicesinc@comcast.net or you can use the Get an Estimate form – here